• NUNO NONO NURSERY, VALENCIA SPAIN | GIROD + ANTON ARQUITECTOS | PHOTO MARIELA APOLLONIO

CUSTOM CURVED PANELS

LIGHT-WEIGHT, LIGHT-TRANSMITTING BONDED SERIES HONEYCOMB PANELS CAN BE CURVED TO SPECIFICATION

 

Panelite Bonded Series panels can be thermoformed to custom radii, to create light-transmitting curved walls with many advantages over curved glass:

 

– Curved Panelite  panels are air-cured as opposed to an energy-intensive kiln cure

– Honeycomb panels weigh one-fifth the weight of glass

– Ease of transportation, handling, and installation is much higher with honeycomb

– Panelite panels can be cut on site if needed, glass cannot

– Curved Panelite panels cost a fraction of the cost of glass – from the panel cost itself to the costs of shipping, handling and installation

 

Our honeycomb panels are thermoformed in the factory to specified radii, mocked up at full scale if required, and delivered to the site pre-curved and pre-cut with optional interlocking ClearConnect joints, to facilitate installation and minimize materials and labor onsite.

 

Panelite Bonded Series Translucent Honeycomb Panels | Available Curved Molds for Thermoforming

Panelite Bonded Series Translucent Honeycomb Panels | Available Curved Molds for Thermoforming

 

A RANGE OF RADIUS MOLDS ARE AVAILABLE IN STOCK FOR MORE COST- AND TIME-EFFECTIVE CURVED PANELS 

Molds are in stock for the above radii, and almost any other radius can be produced on a custom basis.  Contact us via web form or at 323-297-0121 to inquire about curved panel options.

 

Panelite Bonded Series Translucent Honeycomb Panels Partitions Curved CitedO Sochaux Aquatics Center Agence 2A Philippe de Rochechouart 10

Engineering/Product Design of Curved Panel for Cited’O Aquatics Center

Panelite Bonded Series Translucent Honeycomb Panels Partitions Curved CitedO Sochaux Aquatics Center Agence 2A Philippe de Rochechouart 3

At Cited’O, Architects Agence 2A Philippe de Rochechouart and Arch. S. Coydon specified B-ECBT panels curved to two radii: 2570 mm for the reception desk and 6700 mm for the wave-wall.

More images of Cited’O.

 

Panelite Bonded Series Translucent Honeycomb Panels Curved Partitions Nuno Nono Nursery GIROD+ANTON ARQUITECTOS Photo Mariela Apollonio 8

At Nuno Nono Nursery, Girod + Anton Arquitectos specified four different colors of Starlight panels curved to three radii: 1300 mm, 1889mm and 3120mm to create a colorful, fluid, creative environment for children.

More images of Nuno Nono.

 

Panelite Bonded Series Partitions | Project: Fondazione San Paolo, Turin, Italy | Curved Translucent Panels

Fondazione San Paolo, Turin, Italy | Durbiano Reinerio Architetti, arch. Luca Reinerio | Photo: Piùluce, Arch. Carlo Deregibus

At Fondazione San Paolo, a historical building  in Turin, Italy, Bonded Series partition walls are used to divide the space while honoring the character of the original architecture. With muted satin facings, double-walled Bonded Series panels provide a luminous partition system throughout the space that highlights rather than conflicts with the original materials and spatial quality of the building. In several of the administrative areas, creating office partitions with custom curved panels allowed the architects to maximize the occupiable space.

 

Installation in process at Sprint EBC. Design: Rees Masilionis Turley Architecture. Custom Curved B-RCCTS panels with ClearConnect BF-ITL3 interlocking joints and BF-RAD pre-fabricated mitered corners.

Installation in process at Sprint EBC. Design: Rees Masilionis Turley Architecture. Custom Curved B-RCCTS panels with ClearConnect BF-ITL3 interlocking joints and BF-RAD pre-fabricated mitered corners.

At Sprint’s Executive Briefing Center, architects RMTA  specified custom-curved Bonded Series panels with random mix tubular honeycomb core and facings that are tranparent on one side and satin on the other (B-RCCTS), to obtain the ideal light diffusion for a dramatic backlit curved wall.