• Panelite-ClearConnect-installation-detail-for-translucent-honeycomb-panels-BF-ITL3-Interlocking-Joint-Detail_

BF-ITL3 | Kerf + Insert Detail

The most minimal installation detail of the entire ClearConnect system, the ITL3 and relies on a simple kerf cut into the section of the core. Either a transparent spline or biscuit joint (ITL3B ) is inserted in the kerf to interlock the panels.

Compatible Panel Types:

Starlight (B-EC) – Expanded PETG

Lightben (B-TC) – Tubular Polycarbonate in single cell diameter

Kaos (B-RC) – Tubular Polycarbonate in random-mix of cell diameters

BF-ITL3 RCCT ClearConnect detail for Panelite translucent honeycomb panels section A

BF-ITL3 Interlocking Joint detail shown on B-RCCT panel (Random Clear tubular honeycomb core, Clear Transparent facings)

BF-ITL3 RCCT ClearConnect detail for Panelite translucent honeycomb panels section B

BF-ITL3 Interlocking Joint detail shown on B-RCCT panel (Random Clear tubular honeycomb core, Clear Transparent facings)

BF-ITL3 RCCT ClearConnect detail for Panelite translucent honeycomb panels elevation

BF-ITL3 Interlocking Joint detail shown on B-RCCT panel (Random Clear tubular honeycomb core, Clear Transparent facings)

The biscuit joint works in a similar fashion to the spline, using regularly spaced biscuit joints approximately every 24″ instead of a continuous spline insert.

BF-ITL3B TCCT ClearConnect detail for Panelite translucent honeycomb panels elevation angled

BF-ITL3B Interlocking Biscuit Joint detail shown on B-TCCT panel (Tubular Clear honeycomb core, Clear Transparent facings)

BF-ITL3B TCCT ClearConnect detail for Panelite translucent honeycomb panels elevation

BF-ITL3B Interlocking Biscuit Joint detail shown on B-TCCT panel (Tubular Clear honeycomb core, Clear Transparent facings)